Siemens 5SE2363 Neozed Fuse 63A Copper D02 Cylindrical cartridge fuses used to quickly protect the electrical installations in factories or residences and the electrical equipment connected to this installation against overcurrents and short circuits, from 2A to 100A in sizes 10×38, 14×51, 22×58 It is produced with a short circuit breaking capacity of 100kA.

Siemens Motor Protection Switch 3RV2011-0HA10 Protects 0.55-0.8Amper motors and installations against the effects of overcurrent and short circuit. It is connected to the motor circuit. It has standard key capacity. The heat loss, compact and climate-proof circuit breakers are optimized for use in switching equally correct pitch in load feeders.

Siemens 3RT 1016-1AF01 Contactor is generally used in motor protection and switching circuits. The most widely used type is suitable for use in 3-phase systems. They are used in low voltage circuits and control of electric motors.

Legrand CTX3 85A Contactor 2NO+2NK 230V Ac Coil Voltage 416206 is generally used in motor protection and switching circuits. The most widely used type is the contactor suitable for use in 3-phase systems. It has 3 poles. They are used in low voltage circuits and control of electric motors.

Legrand XC3 2X 63A 30Ma Residual Current Switch 403184 Wiring faults, insulation problems, defective appliances or failures in electrical systems can trigger dangerous leakage currents, leading to accidents or electrical fires. Residual current devices can prevent this. These devices provide protection against dangerous shock currents in case of direct or indirect contact with live conductive objects. Residual current protection relays cut the energy in the circuit they are connected to quickly and safely if the threshold differential current is exceeded.

Legrand XC3 4X 40A 30Ma Residual Current Switch 403191 Wiring faults, insulation problems, defective appliances or failures in electrical systems can trigger dangerous leakage currents, leading to accidents or electrical fires. Residual current devices can prevent this. These devices provide protection against dangerous shock currents in case of direct or indirect contact with live conductive objects. Residual current protection relays cut the energy in the circuit they are connected to quickly and safely if the threshold differential current is exceeded. In many application areas, it is a necessity to use residual current protection relays with a threshold current not greater than 30 mA in new buildings. This requirement has been applied since 1984 in rooms with a bathtub or shower at 20 A' for non-professional and general use.

In systems with balanced and unbalanced loads with reactive power control relays, compensation is made by measuring current information from one or three phases.

Siemens Sirius Thermal Relay 1No+1Nc 11-16A; Size S00 (Rail Mount) 3RU2116-4AB1

Entes MCB-15 24/240V Ac/Dc 4 Function Timer (V.1) M1236-M4118 Ability to work with internal battery without the need for power supply (MCB-200) 1,000,000 contact opening/closing possibilities (MCB-200) User friendly Easy setup with the main functions, besides the main functions, flexible solutions suitable for the purpose in applications with its sub-functions that can be controlled by triggering. With the memory feature, the ability to save time and status information in the memory when the power supply is interrupted in some functions and to continue from where it left off when the supply is restored, Functions in real time with digital time setting It has the features of fulfillment according to the hour.

Entes MKC-05P Pk28 220Vac T/İ Motor Protection Relay M1728 MKS-MKC motor protection relays are designed to prevent 3-phase motors from overheating and being damaged due to phase failure or imbalance in industrial facilities. Motor protection relay, also known as phase protection relay, prevents motors from operating under 2 phases. It provides protection against overheating of motors by operating under 2 phases, phase sequence, phase unbalance and low supply voltage.

Siemens 3KD4230-0PE10-0 Fuseless Load Breaker Left-hand Drive 3x400A It is referred to as load disconnector or disconnector. It has 3 poles. It has a front operating mechanism center. It is armless and flat terminal main unit. It is the design of the 3 KD switch disconnector actuation mechanism. It belongs to the group of power switches. The key part is flat connector. It is a fixed mounted device. They are used in main switches, emergency switches, industry business switches, infrastructure and residential construction.

Siemens 3SU1132-0AB30-1BA0 Button Fully Illuminated Spring Return 24V Ac/Dc Matte Metal Button is an electrical device that transfers operations such as pressing and turning to the machine and allows us to control the system. Contact: It is the conductive part of the switch that opens or closes the circuit. Contact block: It is the part that contains the contact. The contact blocks are held on the back of the button or signal lamp by means of a holder. Operator/Actuator: It is the part that works by touch. Like button head, selector switch button Lamp block: It is the part that activates the electric lamp when it receives the signal.